Sales of telecommunication products
Destination
The dome closure MTOK-L7 is designed for the installation of self-supporting cable with a capacity of up to 48 optic fibers. An oval input allowed to accommodate a loop of optical loose tubes without cutting. The loop is laid out in the tray on the opposite side of the splice trays.
Mechanical method of sealing. Sealing is made of an elastic O-ring and reinforced plastic self-tightening clamp. The clamp lock design allows to transform the latch is into a lever while opening for easily removing the clamp from the clutch.
Cable inputs are sealed with a heat shrinkable tube. Round ports on a splice closure are sealed and have a stepped configuration with different diameters. Slitting a port sleeve in a certain place, allows to choose an input suitable to the diameter of connected cable. In this way, excessive tension on the heat shrinkable tube after shrinkage is eliminated when connecting comparatively thinner cables. All ports of the splice closure are also equipped with individual units for central strength member anchoring
Technical characteristics
Manufacturer |
![]() |
Max. number of splices |
48 |
Number of entered FOC: - round-shaped stepped, up to 20 mm - round-shaped stepped, up to 16 mm - oval-shaped, up to 25 mm |
2 2 2/1 |
Max. number of trays |
3 |
Sealing method of case |
Clamp |
Sealing method of entered FOC |
Heat shrinkable tube |
Operating temperature, ºС |
- 60…+70 |
Download characterisrics of Optical closure МТОК-L7 in PDF