Sales of telecommunication products

Optical closure МТОК-G3

Optical closure МТОК-G3

Destination

The dome closure MTOK-G3 is designed for the installation of self-supporting cable and urban cables of any design. An oval input allowed to accommodate a loop of optical loose tubes without cutting. The loop is laid out in the tray on the opposite side of the splice trays.

Mechanical method of sealing. Sealing is made of an elastic O-ring and reinforced plastic self-tightening clamp. The clamp lock design allows to transform the latch is into a lever while opening for easily removing the clamp from the clutch.

Cable inputs are sealed with a heat shrinkable tube. Round ports on a splice closure are sealed and have a stepped configuration with different diameters. Slitting a port sleeve in a certain place, allows to choose an input suitable to the diameter of connected cable. In this way, excessive tension on the heat shrinkable tube after shrinkage is eliminated when connecting comparatively thinner cables. All ports of the splice closure are also equipped with individual units for central strength member anchoring

Technical characteristics

Manufacturer

Max. number of splices

144

Number of entered FOC:

- round-shaped stepped, up to 20 mm

- round-shaped stepped, up to 16 mm

- oval-shaped, up to 10 mm/up to 25 mm

 

2

4

4/2/1

Max. number of trays

6

Sealing method of case

Clamp

Sealing method of entered FOC

Heat shrinkable tube

Operating temperature, ºС

- 60…+70

Download characterisrics of Optical closure МТОК-G3 in PDF