Home page / Products / Plumett / Cable blowing / installation equipment / CABLEJET™

CABLEJET™

Destination

Blowing equipment CableJetTM is designed for blowing or floating telecommunication cables (optical fibre, coax or multipair) D from 9 up to 18 mm in preinstalled ducts OD from 20 up to 63 mm.

Compact, light and easy to use, it comes with a toolbox containing all the tools needed for maintenance and service.

Like all our Jetting devices, it is equipped with a distance and speed counter for a better control of the installation.

Technical characteristics

Parameter	Value
Standard version	CableJet™
Manufacturer
Type	P01
Cable diameter, mm*	9-18
Duct OD, mm	20-63
Drive unit	Pneumatic
Max. air consumption of motor [m³/min]	0,5 (at 4 bar) 0,8 (at 6 bar)
Pushing force, N	0-300
Linear pressure on cable, N/cm	0-100
Maximum speed, m/min	100
Maximum air pressure, bar	8-12
Maximum water pressure, bar	25
Dimension of apparatus, LхWхH (mm)	520x320x230
Dimension of apparatus with case, LхWхH (mm)	600x400x340
Dimension of tools and accessories case, LхWхH (mm)	600x400x250
Weight of machine, kg	21,0
Total weight, kg	47,0
Operation temperature**	-10°С…+60°С

*depends on the cable specification

**By ambient temperatures over +25°С, it is highly recommended to use an Air after cooler

Standard equipment

Accessories;
Set for tools;
Speed and distance indicator;
Air hose 1 ½ “ (10 meter) and stop valve to connect to compressor;
Operation and maintenance manual.

Recommended to purchase additionally*:

Set of duct inserts: OD 32, 40 and 50 mm;
Set of cable inserts: 9-11 mm, 11-12,5 mm, 12,5-14 mm, 14-15,5 mm, 15,5-18 mm;
Set of seals

1 set of duct and cable inserts, seals with parameters previously agreed with the customer are included The remaining dimeters are recommended to be purchased additionally

Accessories