Air after-cooler

Destination

Air after cooler is designed for air flow cooling and to improve "Jetting" performances when ambient temperatures exceed 20°C. This accessory is highly recommended to increase distance, installation speed, and reduce the potential of cable damage due the undue influence of high heat on cable jackets.

Technical characteristics

Parameter	Value
Standard version	Air after cooler
Manufacturer
Type	АС-12
Application	Intelli-MicroJet™ MicroJet™ IntelliJet™ MiniJet™ CableJet™ SuperJet™
Maximum air consumption of motor, m3/min	0,85 (on 7 bar)
Maximum working pressure, bar	12
Maximum air flow, m3/min	12
Maximum air inlet temperature, 0C	100
Maximum air pressure at the motor, bar	7
Maximum pressure drop, bar	0,3
Dimensions with case, LхWхH (mm)	680х420х580
Total weight, kg	49

Standard equipment:

1. Accessories;
2. Water separator with integrated filter;
3. Fan driven by a pneumatic motor fed from the main air hose;
4. Control system of the fan motor with on-off air valve;
5. Air conditioning unit for the air motor with water separator, pressure control knob, pressure gauge and drip feed lubricator;
6. Air hose (10 m), 1 1/2", with screw connectors RD 55 x 1/6 at both ends;
7. Operation and maintenance manual.